It is more common in decoration and more commonly used, that is, wood board and plywood. Consumers often say that the two are not well distinguished. So today Hot Press Machine Supplier will take everyone to see the difference between the two!
Vener Rotary Cutting Machine
Difference between plywood and wood board:
First, the production process is different
The manufacturing process of plywood is mainly using a Vener Rotary Cutting Machine to spin cut the wood into veneer, or planing it into thin wood, and then glue it together with an adhesive. Generally, it consists of three or more layers.
The wood board is simple. It is composed of two veneers spliced together by glue. The middle part is a natural wooden block after heat treatment. It is processed into grids and then spliced with a jigsaw. It is a basic material commonly used in modern furniture production and decoration modeling, which is commonly known as the large core board in people's mouths.
Second, the scope of use is different
Plywood is generally used as a common material for furniture. In addition, it can also be used as an indoor false wall and partition material. Occasionally, it can be used as doors and windows or curtain boxes.
The use of wood board is very wide. Not only can it be used as general furniture basic materials, but also can be used as materials for airplanes, ships, automobiles, constructions and packaging boxes.
However, the plywood sandwich material has poor consistency and is easy to deform, so it is generally not used as a cabinet door. But wood board can.
Third, the specifications are different
At present, the common plywood thicknesses on the market are 3mm, 5mm, 9mm, 12mm, 15mm, and 18mm.
The common size of wood board is 2440mm × 1220mm. The thickness is 12mm, 15mm, 18mm, 20mm. The most common thicknesses are 15 mm and 18 mm.
Fourth, the internal structure is different
The internal structure of the plywood is formed by glueing the blanks perpendicular to each other according to the direction of the wood grain of the adjacent layer. The solid wood strip inside the wood board is a longitudinal splicing method. The internal structure between the two is different, so their bearing pressure is also different. Because of the longitudinal splicing method of wood board, it is easy to cause lateral deformation. You must consider it carefully when choosing.
Five, the price is different
On the market, in general, furniture woodboard is a bit more expensive than plywood. This is the case in terms of raw materials, but the wood board needs to be painted and glued, and the plywood is omitted, and the price of the two will eventually differ.
The above is the difference between plywood and wood board introduced by Plywood Processing Equipment supplier. Everyone must choose the material according to their own situation, whether you buy wood board or plywood, you must identify the big brands. Because the plywood itself has some formaldehyde, and the wood board needs to be glued and painted later, there is a certain amount of formaldehyde, so after the renovation is complete, don't take it lightly.