Reasons For Degumming Of Plywood Machine

With the continuous advancement of society, plywood machines have been widely used in various industries. Under normal circumstances, it is mainly composed of combination speakers, interior decoration, office supplies, building templates, packaging exhibitions, and various furniture. The product, when it is produced, it also needs to pay attention to its production process. Under normal circumstances, its process can be divided into rotary cutting machine, veneer dryer, glue applicator, pre-press machine, Plywood Hot Press Machine and horizontal sawing machines, etc., so that the products produced can be used better.

Plywood Hot Press Machine

For glued sheets, glue application is an important step, so how should we operate correctly when using the equipment? The Hot Press Machine Supplier will come to tell you.

It is normal to occasionally break the glue during processing. It may be because the moisture is too heavy, or the used instant glue is reused. In this case, first check if there is any problem with the glue. Is there any problem? Something like particle deposits, in this case, mechanically produces the problem of dispensing glue. It is also possible that the controller of the dispensing is not working properly, and the gel breaking phenomenon may occur due to abnormal work or insufficient performance of the controller. Therefore, we can refer to the above two points for inspection when using.

When using it, we also need to pay attention to the cleaning of the machine after each use, to avoid the blockage of the glue, and also check before use to ensure that we can use it correctly.

In addition, we will share with you the reasons why the Plywood Manufacturing Equipment will be degummed. In the process of using the plywood machine, it can show a lot of performance advantages, but why does it degumming when it is used? This type of plywood can be degummed, which is caused by a variety of reasons. The first is the poor glue used. In addition, the amount of glue used is insufficient during the process of applying the glue. Therefore, in daily life, it is necessary to pay attention to the amount of glue applied, because the burr groove of the plywood is too deep or the moisture content is too high, which also causes the phenomenon of degumming, so in the process of producing it, You need to pay attention to the above problems. In the process of using this product, only knowing the reason of degumming can solve these problems well, so that it can be used better and play its role.

Finally, we should pay attention to the corresponding maintenance according to different use environments and requirements, so as to ensure its effect and extend its service life.

For the plywood machine, the glue is used to glue the plate during production and processing. We should know that the quality of the glue will affect the quality of the product. If the inferior product will seriously affect the formaldehyde content of the plate. Therefore, we must pay attention to the corresponding quality inspection work for the use of glue. Of course, we should pay attention to the different environments in the use of the appropriate maintenance, do not let it in a humid environment, otherwise it will easily rust affect its quality and longevity. In fact, when we purchase, we should pay attention to the purchase of the right function according to different usage requirements, so that we can better play its role and extend its service life.